• HEALTH,
PERSONAL CARE
& PHARMA

    HEALTH,

    PERSONAL CARE

    & PHARMA

Challenges like particle size reduction down to the nanoscale, processing under explosion-proof conditions (ATEX) or exact feeding of small API amounts with controlled homogenising are just a few examples of the demanding Health, Personal Care and Pharma industry. With our brand FrymaKoruma, we provide wet grinding, emulsifying, dispersing and deaeration for active pharmaceutical ingredients, ointments, creams, lipstick masses and toothpaste, from lab to industrial scale. Our ProXES experts provide you with the optimal solutions according to your requirements.

Which Equipment Is Used to Produce Pharmaceutical and Cosmetic Products?

Pharmaceutical and cosmetic products such as creams, ointments, gels and API suspensions are produced with high shear emulsifiers and wet mills. A high shear emulsifier with rotor-stator homogenizer and vacuum deaeration combines the oil and water phases, controls the droplet size and removes air from the product. Wet mills such as colloid mills, corundum stone mills or very fine grinding mills reduce APIs and pigments to the required fineness. At ProXES, these tasks are covered by FrymaKoruma machines: the Dinex and VME for emulsifying, homogenizing and dispersing, the DIL for continuous inline emulsifying, and the Toothed Colloid Mill, the Corundum Stone Mill and the Co-Ball for wet grinding.

How Does the Production Process Work?

Depending on the product, the production of creams, ointments, gels or suspensions runs through these steps:

  1. Preparing the phases: The water and oil phases are prepared, and powders such as thickeners or pigments are inducted and wetted, for example with the FrymaKoruma POW-DIL powder-liquid mixer.
  2. Emulsifying and homogenizing: The high shear rotor-stator of the FrymaKoruma Dinex combines both phases and ensures precise droplet size control, which defines texture and stability.
  3. Wet grinding: APIs, pigments or softgel fillings are ground to the required fineness: in the FrymaKoruma Co-Ball down to below 1 µm, in the Toothed Colloid Mill for pharmaceutical suspensions and tablet coatings, or in the Corundum Stone Mill for pigments and softgel fillings.
  4. Deaerating, heating and cooling: The Dinex and VME deaerate, heat and cool the product in the same machine. In continuous lines, the FrymaKoruma Vacuum Deaerator removes air from low-viscosity products such as carbomer suspensions.
  5. Cleaning and sterilization: After production, the Dinex is cleaned and, where required, sterilized in place (CIP/SIP).

Challenges and Standards in Pharma and Cosmetics Production

Pharmaceutical and cosmetic production has to meet high technical and regulatory requirements:

  • Particle size reduction down to the nanoscale: APIs and pigments must be ground finely and evenly so that the active ingredient is distributed and stable in the product.
  • Explosion protection (ATEX): Products with solvents or alcohol are processed in explosion-proof systems according to the ATEX Directive 2014/34/EU.
  • Exact feeding of small API amounts: Small amounts of active pharmaceutical ingredients must be dosed precisely and homogenised evenly into the whole batch.
  • EU GMP and FDA cGMP: Medicinal products are manufactured according to EU GMP (EudraLex Volume 4, with Annex 1 for sterile products such as eye drops and Annex 15 for qualification and validation) and, for the US market, according to FDA cGMP (21 CFR Parts 210 and 211).
  • ISO standards: Cosmetics are produced according to ISO 22716 (Good Manufacturing Practices for cosmetics). EN ISO 14159 defines hygiene requirements for the design of machinery.

The FrymaKoruma Dinex is built in a GMP-compliant design, is CIP/SIP capable and ensures precise droplet size control under GMP-compliant conditions.

FrymaKoruma Machines for Pharma, Cosmetics and Personal Care

Dinex

Personal Care & Pharma high shear emulsifier with rotor-stator, GMP-compliant design and CIP/SIP capability. It homogenizes, mixes, disperses, deaerates, heats, cools, cleans and sterilizes. Capacities up to 3,000 kg/h (cold processed emulsion, standard FrymaKoruma formulation).

Used for: cosmetics, sterile pharmaceuticals, creams, ointments, gels, toothpaste

VME

Universal mixing and dispersing system from lab to industrial scale, with homogenizing, heating, cooling, deaeration and deagglomeration. Capacities up to 1,700 kg/h (toothpaste, standard FrymaKoruma formulation).

Used for: toothpaste, creams, lotions and pastes

DIL

Inline emulsifier for continuous, uninterrupted emulsification with minimal footprint. Capacities up to 60,000 l/h for low-viscosity products.

Used for: creams & ointments, emulsions & suspensions

Toothed Colloid Mill

Variable wet milling with adjustable gap for extremely fine particle reduction, also suitable for high-viscosity products.

Used for: pharmaceutical suspensions, tablet coatings, decorative cosmetics, creams & ointments

Corundum Stone Mill

Versatile wet fine grinding and dispersing. The MK series for pharma and cosmetics grinds pigments, fibres, crystals and herbal active ingredients with a fully enclosed processing zone.

Used for: softgel fillings, pigment slurries, lipstick, mascara, ointments

Co-Ball

High-performance very fine grinding with a fineness down to below 1 µm, from lab to industrial scale.

Used for: API suspensions, softgel fillings, lipstick masses

Frequently Asked Questions (FAQ)

NEED TO KNOW MORE? GET IN TOUCH WITH OUR EXPERTS.

Contact Symbol